WINGS
OXYCHEQ WINGS
OxyCheq Single Mach V Wing (18#, 30#, 40#)
The MACH V Single Wings are 360 loop wings built to last and have extremely low profile producing less drag in the water resulting in less diver fatigue and better air consumption. The Mach V has integrated role control devices eliminating the need for a single tank adaptor with an OxyCheq backplate.. Inflator hose elbow is off center so it will not interfere with the first stage regulator. Easy access to bladder via a 360 degree zipper. Colors available: Red, Orange, Yellow, Lime Green, Blue
OxyCheq Environmental Mach V Wing (30# or 40#)
This is the same wing as the popular Mach V wing but with a chemically resistant outer shell. It is designed for safety and commercial divers that often have to dive in less desirable waters. Clean up time for the wing is exceptionally fast in comparison to wings with shells made of Cordura.
OxyCheq 42# and 55# Vertex Extreme Single Bladder Single Inflator Wings
The Vertex Extreme Series is a Single Inner Bladder/Single Inflator Extreme Explorer Wing for Double Tank Diving. The Extreme series wing provides the greatest puncture and abrasion resistance than any wing Oxycheq has ever made. Lighter in weight compared to the Cordura Vertex.
Oxycheq Mach V Extreme Series Single Wing (30# & 40#)
Mach V Extreme Series Wing for Singles. The low profile produces less drag in the water.
The extreme series wing provides the greatest puncture and abrasion resistance than any wing made by Oxycheq.
Puncture and abrasion protection is provided by the tiny, hard guard plates that are adhered to conventional and non-conventional base fabrics. Because the gap between guard plates is very small, it provides high levels of protection from sharp pointed objects and abrasion.
Oxycheq 55# Vertex Signature Series Doubles Wing
55# Vertex Signature Series Doubles Wing. Single bladder, single inflator. BC hose included.
LIGHT MONKEY WINGS
Light Monkey wings are 100% manufactured in the USA using the highest-quality materials. The outer bag is 1680 denier ballistic nylon, chosen for its tear strength and abrasion resistance. The bladder is 15 mil virgin medical-grade polyether urethane. The zipper is a 10 mm Vislon non-corrosive zipper with locking slider. The wings includes a 13" crush-proof hose, two 2" EDM bands for hose routing, and a standard K-style power inflation valve.
Light Monkey 28lb Wing
The 28 lb wing is the perfect size for single tank rigs or a rebreather; the donut shape provides all-around lift. The wing includes a 13" crush-proof hose, two 2" EDM bands for hose routing, and a standard K-style power inflation valve. The 28 lb wing does not have slots for tank bands, as it is designed for use with a single tank adapter.
Light Monkey 45lb Wing
The 45 lb wing is the perfect size for doubles. The inflation hose is located in the middle of the wing, so it doesn't interfere with hose routing on either the left or right post on a set of doubles. The Light Monkey 45 lb wing has a true 45 lbs of lift. The cutout for the back plate is the same size and shape as our backplate, preventing gas from getting trapped between the backplate and wing.
POSEIDON WINGS
Poseidon One Wing
The One Wing is made for equipment with a negative weight in water that does not exceed 19 kg / 41.6 lbs and has a lifting capacity of 225 N.
Weight (g): 1365
Material: Cordura 1000
EAN: 7340193704372
KEY PERFORMANCE FEATURES
- Narrow passage behind the neck
- Three dump valves
- Inflator with stainless steel mechanism
- ClamRetract System
Poseidon Rebreather BCD
The first of its kind and features integrated exchangeable lungs, weight system and the Poseidon individual patch system for personalization. The Rebreather BCD is constructed to the highest quality and durability using ballistic nylon, YKK zippers and hand crafted detailing.
Buoyancy by size: XS=80 N, S=90 N, M=100 N, L=110 N, XL=140 N
Weight (g): 4300
Material: Premium Nylon 1680 and Cordura 1000, YKK Waterproof Zippers
EAN: 7340193704211
Poseidon Wing WRB
Wing designed to sustain a good buoyancy and fit together with our custom made backplates. Made in ballistic nylon with an integrated deflate system and self retracting bladder. The preferable choice of buoyancy device.
Maximum buoyancy is 150 N which is reached within 5-8 seconds.
Weight (g): 1760
EAN: 7340193700831
HIGHLAND WINGS
Highland wings are versatile and cross-compatible so that they easily adapt to other brands of back plates and harnesses.
HIGHLAND 20LB TRAVEL WING
- 25 in Miflex QD Carbon hose
- 16 in corrugated hose with K-style inflator
- Low-profile, rapid-exhaust dump on upper left
- Low-profile dump on lower inside left
- Integrated carrying handle on top center
- Removable tank anti-roll assembly
- Vent at top center allows air to escape between the inner and outer bag
- Spiral hose retainer loop
- Outer bag made from 1000D nylon with PU coating
- Inner bladder made from 210D nylon
- 4 slots allow direct attachment to cylinder with nylon cam bands
- 2 sets of 11 in centered grommets
HIGHLAND 37LB SINGLE WING
- 360º full circle design allows quick left/right gas transfer
- Vent at top center allows air to escape from between the layers
- 4 cam slots allow direct attachment to cylinder with nylon cam bands
- Built with internal loops for optional bungee retraction
- “K-Style” tech inflator, center point attachment
- Elliptical 19 in corrugated hose to reduce drag
- 25 in Miflex quick-disconnect hose
- An anti-roll bar assembly (removable)
- All-new hardware including a low-profile elbow, collar and blanking cap
- A carry handle
HIGHLAND 45LB TWIN WING
- 360º full circle design allows quick left/right gas transfer
- Vent at top center allows air to escape from between the layers
- 4 cam slots for direct attachment to cylinder with nylon cam bands
- Internal loops for optional bungee retraction
- “K-Style” tech inflator, center point attachment
- Elliptical 19 in corrugated hose to reduce drag
- 25 in Miflex quick-disconnect hose
- 3 sets of 11 in centered grommets
- Grommets made from nickel-plated brass
- 210D nylon bladder
- Cover 1000D nylon Cordura®
- Right or left side OP
COMPLETE BCD SYSTEMS
POSEIDON ORIGO BCD
The Origo BCD is constructed to the highest quality and durability using ballistic nylon, YKK Waterproof Zippers and hand crafted detailing. It is simple in function, while still including the all the necessary components like integrated weight pockets, accessory pockets and D-Rings.
Buoyancy by size: S=90 N, M=100 N, L=110 N, XL=140 N
Weight (g): 3000
Material: Premium Nylon 1680 and Cordura 1000E
AN: 7340193702910
POSEIDON ONE WING AND HARNESS
Key Features:
- Narrow passage behind the neck designed to not impede head movement or foul regulators and hoses when inflated
- Evenly spaced 40 cc holes for attachment of d-rings, weight pouches and accessories
- Adjustable spine can easily be lengthened or shortened to fit an array of sizes
- Comfortable and supportive padding for your back
- Quick release shoulder and waist straps
- Possible to replace plastic backplate with steel
- Double, non-flex tank-band tank attachment system
LIGHT MONKEY 28LB STAINLESS STEEL SYSTEM
The 28 lb Stainless Steel System is for single tank diving or rebreathers.
Light Monkey stainless steel backplates are cut from a sheet of 304 stainless steel, bent, machined, and then given a brushed finish.
System includes stainless steel backplate with harness, 28 lb wing, low profile STA, bolt kit, cam straps, and our "Shank" cutting tool.
LIGHT MONKEY 28LB ALUMINUM SYSTEM
The 28 lb Aluminum System is for single tank diving or rebreathers.
Brushed black anodizing provides corrosion resistance to salt water
All edges and cutouts have been machined to give a nice beveled edge which gives your webbing a longer life.
System includes aluminum backplate with harness, 28 lb wing, low profile STA, bolt kit, cam straps, and our "Shank" cutting tool.
LIGHT MONKEY 45LB STAINLESS STEEL SYSTEM
The 45 lb Stainless Steel System is for use with doubles.
Light Monkey stainless steel backplates are cut from a sheet of 304 stainless steel, bent, machined, and then given a brushed finish.
The system includes the stainless steel backplate with harness, 45 lb wing, and our "Shank" cutting tool.
LIGHT MONKEY 45LB ALUMINUM SYSTEM
The 45 lb Stainless Steel System is for use with doubles.
Light Monkey stainless steel backplates are cut from a sheet of 304 stainless steel, bent, machined, and then given a brushed finish.
The system includes the stainless steel backplate with harness, 45 lb wing, and our "Shank" cutting tool.
XS Scuba Companion BC
By adding a compact wing to the Pony Pac, you have the Companion BC, an ultra-compact travel BC. The Companion BC is 40% lighter than traditional BCs weighing in at only 5 lbs (2.3 kg). Take advantage of the versatility that a removable air cell can offer.